<< | 1-3 | >>


Step 1

To make some simple breadboard jumper , you will need some staples.  

Dsc02022.jpg (60091 octets)

 


Step 2 

Take each staple and insert them in your breadboard. You can cut and make some smaller one. The only inconvenient is that the jumper are to small. You could solder jumper together to make it longer. 

 

Dsc02024.jpg (63177 octets)

 


Step 3 

After your circuit examiation you need to remove the jumper. It hard to remove them by hand, so take a knife and remove them.


Dsc02025.jpg (63958 octets)

 


<< | 1-3 | >>
© 2000-2002 Jérôme Demers All right reserved 


 
 >>>> BACK to "Insectroïdes" <<<<